Special Cement Products

In 1977, GEL obtained the right to manufacture and distribute products of Denki Kagaku Kabushiki Kasha from Japan such as special type of non-shrink cement used for grouting work, from small machines to large machines, including repair work and Denka Quick Capsule used for embedding steel rebar or bolts in concrete structures. In addition, GEL also has other special cement products, including skim coat for plastering wall and cement tile adhesive for tiling.

DENKA PRETASCON Type-1

For Large Sized Machine Foundation

Introduction

The highest performance type of non-shrink grout cement, good flow ability with high early and high ultimate strength

Applications
  • General concrete repair
  • Concrete structure repair such as column, beam and road surface
  • Cast the base for supporting column, bridge structure or concrete slab
  • Fill the gap, such as foundation or concrete formwork
  • Precast wall installation
  • Work which is required greater strength than general concrete
  • Work which is required early high strength
  • Cast the base for supporting small to large machinery and with vibration such as generator, gas turbine etc.
Features
  • Non-bleeding
  • Controlled expansion / non-shrinkage
  • Non-metallic, non-rusting and chloride free
  • Good flow ability
  • Non-air void
  • High compressive strength
  • High early and high ultimate strength. Compressive strength is 300 ksc (Cu) in 1 day and 700 ksc (Cu) in 28 days

DENKA TYPE RX

For Medium-Sized Machine Foundation

Introduction

High performance type of non-shrink grout cement, good flow ability with high early and high ultimate strength.

Applications

  • General concrete repair
  • Concrete structure repair such as column, beam and concrete slab
  • Cast the base for supporting column, bridge structure or crane's rail
  • Fill the gap, such as foundation or concrete formwork
  • Precast wall installation
  • Work which is required greater strength than general concrete
  • Work which is required early high strength
  • Cast a support base for small or medium machinery foundation


Features
  • Non-bleeding
  • Controlled expansion / non-shrinkage
  • Non-metallic, non-rusting and chloride free
  • Good flow ability
  • Non-air void
  • High compressive strength
  • High early and high ultimate strength. Compressive strength is 300 ksc (Cu) in 1 day and 700 ksc (Cu) in 28 days

NON SHRINK GROUT TYPE GLH

For Medium-Sized Machine Foundation

Introduction

Special type of non-shrink grout cement, good flow ability, general purpose use.

Applications
  • General concrete repair
  • Cast the base for supporting column, bridge structure or crane's rail
  • Fill the gap, such as foundation or concrete formwork
  • Precast wall installation
  • Work which is required greater strength than general concrete
Features
  • Non-bleeding
  • Controlled expansion / non-shrinkage
  • Non-metallic, non-rusting and chloride free
  • Good flow ability
  • Non-air void
  • High compressive strength

DENKA PRETASCON PADDING

Introduction

Special type of non-shrink mortar, padding for machine installation and steel structure erection.

Applications
  • Make the padding for machine installation and steel structure erection
  • Cast a support base for small to heavy machinery foundation or vibration


Features
  • Non-bleeding
  • Controlled expansion / non-shrinkage
  • Non-metallic, non-rusting and chloride free
  • Stable form
  • High early and high ultimate strength. Compressive strength is 350 ksc (Cu) in 1 day and 530 ksc (Cu) in 28 days

DENKA QUICK CAPSULE

Introduction

DENKA QUICK CAPSULE is special type of cement, which is generally used use in the work of embedding steel of anchor bolt in the concrete construction with the ability of fast setting and high bonding.

Applications
  • Use for embedding steel of anchor bolt or rebar in concrete structure
  • Embed works for repair or installation
Features
  • Easy to use, convenient and fast
  • High tensile and shear strength
  • Suitable for moist or submerged area
  • Suitable for both vertical and horizontal use
  • Good heat-resistance (as good as concrete)
  • No chloride content / no corrosion of bolts

SUPER SKIM COAT

Introduction

Super skim coat is the ready-mixed cement for smoothening surface wall.

Applications

  • Cover cracks on the surface
  • Cover traces on the surface such as porosity
  • Cover the gap between formwork
  • Smooth the wall surface


Features
  • Non - calcium dust
  • Non – fungus
  • Non – crack and slip
  • High bond strength
  • Easy to use
  • Skim coat can be applied about 1-3 mm thick
  • Skim coat is suitable for both indoor and outdoor

CEMENT TILE ADHESIVE

Introduction

Cement tile adhesive is the ready-mixed adhesive cement for general tile.

Applications
  • General tiling
  • Porous tiling
  • Natural stone tiling
  • Clay tiling
Features
  • Ease of use by adding water
  • High bonding and anti-slip
  • Can be used with all sizes of general tile, low water absorption tile, marble, granite for both interior and exterior
  • Can be used with the maximum wall size 30x30 cm. of general tile and low absorption tile

EPOXY INJECTION EPOXY GEL-S1

Suitable for dried Concrete

Introduction

It is a low viscosity resin, suitable for injection, repair cracks in concrete structures , such as, cracks of concrete ground, cracks of concrete pillars, crack of concrete beams.

Features
  • Can be injected into the racks in concrete and in other structures in every plane
  • Can be attached to concrete, stone
  • Suitable for cracks on the surface size of 0.2 mm. and the depth down to 0.1 mm.
  • Easy to mix according to the proportion specified
  • Hold up very well and is suitable for high tensile structure which has a high vibration or concrete for machine foundation

EPOXY INJECTION EPOXY GEL-S2

Suitable for Wet Concrete

Introduction

It is the type of low viscosity resin, suitable for injection work, repair cracks in concrete structures, such as crack on concrete ground surface, cracks on concrete pillars and concrete beam.

Features
  • Can be injected into the racks in concrete and in other structures in every plane
  • Can be attached to concrete, stone
  • Suitable for cracks on the surface size of 0.2 mm. and the depth down to 0.1 mm.
  • Easy to mix according to the proportion specified
  • Hold up very well and is suitable for high tensile structure which has a high vibration or concrete for machine foundation

WATER STOP

Introduction

It is the rubber used for solving the problem of water leakage by placing the rubber seal between the moving joint and the unmoving joint in various concrete structures. The rubber seal will protect the bleeding of water.

Features
  • Rubber seal is available in 2 knobs and 3 knobs
  • Available in various size to meet customer’s requirement
  • The rubber seal is highly flexible
  • The Rubber seal is tested according to ASTM D792 / D2240 / D412 / D624

BRISTAR 100

Introduction

Bristar 100 is a special chemical used for breaking stones and concrete soundlessly . It does not make loud noises while performing the demolition. Bristar 100 has a cement-like powder characteristic, just simply mix it with water, then, it can be used immediately.

Features
  • Mix Bristar 100 with clean water, Bristar 100 will react chemically with waterm creating water pressure and enlarge itself, after leaving for 6 hours. The maximum pressure will be more than 6,000 tons / Sq. m. at the aging time of 36 hours onwards
  • After reaction process, Bristar 100 shall form a setting and has a higher temperatures
  • Pressure of Bristar 100 shall cause stone or concrete to will rupture out of the ground when it is poured into the prepared holes correctly

DENKA Q-TEX TYPE 3

Introduction

DENKA Q-Tex is a special type of quick setting and non-shrinking cement , generally used for stopping water leaks immediately and hole plugging for general concrete structural works. When it is used correctly., it provide the characteristic of high adhesion and is homogeneous to structure and have high compressive strength.

Features
  • Repair cracks which has water leakage, such as wells, tunnels, dams
  • Color of Q Tex is like cement powder
  • Mixed with water and can be used immediately

GEL SEALANT MS

A high quality, neutral, elastic, 1 component with advanced polymer (SMX) based sealant

Applications

  • Expansion and connection joints indoor in the building industry: sealing of perimeter joints between window and door frames, joints between wall and ceiling
  • Sealing and bonding in the building and construction industry
  • Universal adhesive and joint sealant

Features

  • Good extrudability
  • Stays elastic after curing and very sustainable
  • Excellent adhesion on nearly all surfaces, even if slightly moist.
  • Can be painted with water based paints
  • No odour
  • Does not contain solvents, isocyanates, acids, halogens and toxic components, completely neutral
  • Good weather and UV resistance

GEL EPOXY SMART FIX

High performance epoxy for anchoring and other purposes

Net amount : 390 ml.

Applications

  • Use for embedding steel of anchor bolt or rebar
  • Embed works for repair or installation
  • Bracket embedding and fixing
  • Structural or barrier fixing

Features

  • Pure modified epoxy resin, without styrene, Anti acid, alkaline and salt.
  • Good thixotropic, suitable for both vertical and horizontal use.
  • High compressive strength, flexural strength and adhesive strength.
  • Good seismic performance, fatigue and long-term stress resistance.
  • Cartridge vacuum packing, without bubble and accurate mixing ratio.
  • Adhere to concrete, natural and synthetic stone, metal, wood, plastic and various materials.